Afors Image Viewer 1 of 3 images

Long EZ project - wings, center section spar, hardware

Due to time issues, I am giving up my Long EZ project. Therefore I am offering two wings for a Long EZ, a Long EZ main spar, as well as additional hardware (AN bolts, joints, nuts, etc.).
The construction of the parts was documented with photos, which you can of course use for your own build documentation. I have also created CAD models of the components, which I am willing to share. If interested, I can take up-to-date photos; the parts are currently packed and stored. For buyers with a business ID, an invoice can also be issued.

Both wings are almost finished, including laminated winglets - cores are cut, bonded, spar caps and skins are laminated. They have been slightly modified for an improved “blended winglet.” A radio antenna is already laminated into the left wing, and cables have been routed through the wings all the way to the winglet tip.

- The main spar is almost completed; only the outer fiberglass skin still needs to be laminated. The outer caps are already fully laminated.
- A partially used roll of certified fiberglass fabric Interglas 92145 and two rolls of 3” unidirectional glass tape for spar caps, as well as additional laminating supplies.
- A complete set of small parts (approx. €2000 from AC Spruce), consisting of all kinds of screws, washers, nuts, springs, rivets, bearings, etc., needed for building a Long EZ.
- Long EZ plans with revisions and CAD models.